Fire Alarm
Previous
Next
Detectors
GST point type smoke detector I/C-9102
GST point type smoke detector I/C-9102

Key Features

» Using infrared light scattering principle, with 8-bit micro-processor

» Pre-recorded fire verification program for thousands types of fire

» Special designed chamber avoid water accumulation

» Drift compensation, reject false alarm from environment changing, dust accumulation and component aging.

» Intelligent detector coded by handhold programmer P-9910

» Conventional detector alarm at equivalent 470Ω

» GST point type smoke detector I/C-9102

Suitable for Below Places

Restaurant, Hotel, School, Office, Bedroom, Hall, Electronic Room, Communication Room, Cinema, Staircase, Corridor, Plant Room, Library, File Store, Electric Fire Risk Area.

Protection Area (Normal Places):

80Sqm for ceiling height between 6-12 metres, 60sqm for ceiling height below 6 metres

 

 

Intelligent Reflective Linear Beam Detector I/C-9105R
Intelligent Reflective Linear Beam Detector I/C-9105R

Key Features

» Beam reduction type detection, with 8-bit micro-processor

» 10 to 100 metres detection range

» 3 LED for status indication

» Intelligent program for self-diagnostic

» Drift compensation, reject false alarm from environment changing, dust accumulation and component aging.

» Intelligent detector coded by handhold programmer P-9910B

» Conventional detector alarm at N/O dry contact

» Intelligent Reflective Linear Beam Detector I/C-9105R

Suitable for Below Places

Warehouse, Atrium, Shopping Centre, Airport Terminals

Protection Area :

10-100 metres length by 14 metres width

For proper detection, the detector should be mounted onto fixed support and near to the ceiling (no more than 0.5 metre)

 

 

 

Battery Optical Smoke Detector S-9102
Battery Optical Smoke Detector S-9102

Key Features

» Battery operated standalone optical detector

» Self contained built-in sounder

» 9V (PP3) battery life for one year

» Local Test/Reset button

» Optional simple network up to 30 detectors

Suitable for Below Places

Standalone buildings like villa, house, etc.

 

 

GST Point Type Heat Detector I/C-9103
GST Point Type Heat Detector I/C-9103

Key Features

» Using semiconductor thermo sensor, with 8-bit micro-processor

» Pre-recorded fire verification program

» Combined Fixed-temperature and Rate-of-rise alarm

» Intelligent detector coded by handhold programmer P-9910

» Conventional detector alarm at equivalent 470Ω

» FT alarm at 3 levels, 54°C, 66°C & 80°C. Locally programming by handhold programmer

» RR alarm at 6°C/min. Can be switched off by programmer   for non-suitable places
(Conventional detector needs preset in factory)

Suitable for Below Places

Relative Humidity may frequently over 95%
Non-smoking fire may occur
Dusty area
May have smoke or steam existing in normal condition
Kitchen, Boiler Room, Generator Room, Landry, etc.
Smoking Room
Other places not suitable using smoke detector

Protection Area

30Sqm for normal places, 20Sqm for high risk places

 

 

GST Combustible Gas Detector I/C-9602LW
GST Combustible Gas Detector I/C-9602LW

Key Features

» The leaking of home using combustible gas may cause fire risk, so GST add the gas detector to fire alarm system

» Available for LPG, Natural Gas and Coal Gas, supplied according to order

» Built-in local sounder with 2 stages alarm, 12%LEL and 23%LEL

» Built-in relays for controlling valve and extract fan

» Wall mount or ceiling mount according to gas type

» Addressing by programmer (Addressable type)

Suitable for Below Places

Home using

 

 

GST Ultraviolet Flame Detector I/C-910
GST Ultraviolet Flame Detector I/C-910

Key Features

» High sensitive UV sensor

» Standard calibration set to detect 3cm flame at 6 metres

» Dust / corrosion/ humidity resistant

» Intelligent detector coded by handhold programmer P-9910

» Conventional detector alarm at equivalent 470Ω

Suitable for Below Places

Non-smoking fire fast detection
Protection area: Maximum 12 metres height, 80o open angle
S=(h X tg 40o)2 X π
h is the height of detector

 

 

GST Multi Sensor Detector I-910
GST Multi Sensor Detector I-910

Key Features

» Combining optical sensor and heat sensor

» All features of I-9102 and I-9103 including optical smoke detection, fixed temperature alarm and rate of rise alarm

» Suitable for life safety system which normal single detection not enough

» Detector coded by handhold programmer P-9910

» Protection area same as heat detector

 

 
Hooters
GST Sounder Beacon I/C-9401
GST Sounder Beacon I/C-9401

Key Features

» High level fire-truck sound

» Combined flashing high intensity LED beacon

» Addressable sounder coded by handhold programmer P-9910

» External 24VDC required for addressable sounder

» Conventional sounder driven by 24VDC polarized

Designing Guide

Within whole protection area, the alarm sound level should be at least 15dB above environment

 

 

GST Sounder & Strobe I/C-9403
GST Sounder & Strobe I/C-9403

Key Features

» Beep sound in Evacuate only or Alert/Evacuate mode, setting by programmer P-9910

» Combined flashing high intensity LED cluster

» Addressable sounder coded by handhold programmer P-9910

» External 24VDC required for addressable sounder

» Conventional sounder driven by 24VDC polarized

Designing Guide

Within whole protection area, the alarm sound level should be at least 15dB above environment

 

 
Manual Call Point
GST Manual Call Point I/C-9201
GST Manual Call Point I/C-9201

Key Features

» Non-break glass manual alarm device

» Reset by special sucker

» Semi-flush or surface mount

» Intelligent MCP coded by handhold programmer P-9910

» Conventional MCP alarm at equivalent 470Ω

 

 

GST Manual Call Point I/C-9202
GST Manual Call Point I/C-9202

Key Features

» Non-break glass manual alarm device

» Reset by special key

» Surface mount only

» Intelligent MCP coded by handhold programmer P-9910

» Conventional MCP alarm at equivalent 470Ω

 

 
Panel
GST Passive Repeater Panel GST852RP
GST Passive Repeater Panel GST852RP

Key Features

» Connecting to GST Intelligent panels GST200/500/5000 through RS485 protocol.

» Repeat FIRE signals with complete details

» Connect with panel through twisted 2-core screened cable, Maximum distance 1800 metres

» Maximum 10 repeaters for GST200, 32 repeater for GST500 and GST5000.

» With local MUTE function and information checking button

» 24VDC power supply required